"Design of reinforcement around holes in laminated veneer lumber (LVL) beams"
Contributo in Atti di convegno
Data di Pubblicazione:
2012
Citazione:
"Design of reinforcement around holes in laminated veneer lumber (LVL) beams" / Ardalany, M; Fragiacomo, Massimo; Deam, B; Buchanan, A.. - 1:(2012), pp. 539-547. ( 12th World Conference on Timber Engineering WCTE 2012 Auckland (New Zealand) July 16-19, 2012).
Abstract:
Many practical situations require holes in timber beams. When the hole is large
relative to the depth, the failure of the beam is governed by crack initiation and propagation around the hole. Cracking of a timber beam decreases the capacity of the beam considerably. This paper presents a method for designing the reinforcement around holes in Laminate Veneer Lumber (LVL)
beams so as to recover their full flexural capacity. The design procedure is complemented by a worked example where all verifications are discussed with great detail.
relative to the depth, the failure of the beam is governed by crack initiation and propagation around the hole. Cracking of a timber beam decreases the capacity of the beam considerably. This paper presents a method for designing the reinforcement around holes in Laminate Veneer Lumber (LVL)
beams so as to recover their full flexural capacity. The design procedure is complemented by a worked example where all verifications are discussed with great detail.
Tipologia CRIS:
4.1 Contributo in Atti di convegno
Elenco autori:
Ardalany, M; Fragiacomo, Massimo; Deam, B; Buchanan, A.
Link alla scheda completa:
Titolo del libro:
Proceedings of the 12th World Conference on Timber Engineering WCTE 2012